How To Find An Auto Repair Garage You Can Trust

By admin Posted in Car Basics / No Comments »

How To Find An Auto Repair Garage You Can Trust

As cars, trucks, and SUVs continue to evolve, problems become more difficult to troubleshoot and repair. Worn brake pads can be easily replaced. So too, can a failing alternator, fuel pump, or catalytic converter. However, unless you have advanced tools and plenty of experience, other systems such as your engine, transmission, and air conditioner need the expertise of a trained mechanic. The challenge is finding a mechanic – and by extension, a repair shop – you can trust.

This article will provide a blueprint you can use to find a trustworthy, reliable repair garage when components begin to fail. Now’s the time to begin your search – before your vehicle breaks down. Below, you’ll learn the value of looking for specific affiliations as well as the importance of talking to a shop’s customers. We’ll also take a look at finding a specialist for certain types of repairs.

Noteworthy Memberships And Affiliations

Independent garages can become affiliated with one or more associations if they meet certain qualification standards. These organizations include the American Auto Association (AAA), NAPA Autocare, and Tech-Net. Each organization has their own set of standards which they require members to meet.

For example, AAA requires member facilities to have relatively advanced equipment on-site as well as technicians who have completed certain types of training. They also routinely survey recent customers of each member facility. Customers are asked whether the garage offered a warranty on their work, if the work was completed in a timely manner, and if the estimate was close to the final bill.

When you visit an auto garage, look for memberships in these type of associations. They suggest a high level of service and reliability.

Talk To The Customers

Few people who visit a garage for the first time take the opportunity to ask other customers about their experiences. Doing so can yield valuable insight about the shop. For instance, ask other car owners why they bring their vehicles to the garage. If others mentions that their cars are always fixed correctly the first time, that should give you a level of trust in the proficiency of the technicians.

You might also hear that the repair shop’s estimates are always accurate or that they always complete the work in the timeframe given. These responses too, should make you feel more comfortable entrusting your vehicle to the mechanics.

When You Need A Specialist

Some types of work should be performed by a specialist. For example, engine and transmission problems are best handled by technicians who fix those assemblies on a daily basis. A lot of independent facilities will be happy to work on complex problems, but their technicians may lack the skills needed to do the job correctly. You might have to pay a little more for a specialist’s expertise, but the investment is worthwhile. Not only can they resolve issues more efficiently, but the quality of their work will likely be higher.

Finding a trustworthy auto repair shop is simpler than it seems. The key is to look for professional affiliations, talk to customers, and start looking before your vehicle begins to have problems.

Vehicle Classics

Related posts

How To Replace Your Car’s Valve Cover Gasket

By admin Posted in Car Basics / No Comments »

How To Replace Your Car’s Valve Cover Gasket

While you’re driving, the moving parts of your engine are opening, closing, and shaking in a well-orchestrated symphony of activity. In order for everything to work properly, oil is needed in order to provide lubrication. Given the frenetic activity of your engine’s parts, it’s no surprise that oil is liberally splashed about.

You should be checking your oil level periodically to ensure that your engine has enough to properly lubricate the parts. If you notice that the level is consistently lower than it should be, you may have a leak. One of the areas that can develop leaks is the valve cover gasket (VCG).

A valve cover is bolted to the top of your engine (the cylinder head, specifically). The cover prevents oil from splashing over every component under your hood during operation. The VCG sits between the cover and your engine, and creates a seal. In effect, it keeps oil from escaping.

Over time, the gasket can dry out and develop cracks. If that happens, it will slowly lose its ability to provide a seal, allowing oil to leak. Fortunately, replacing the VCG is a simple process.

Step By Step Instructions

Before taking the valve cover off the gasket, first try to tighten it down. Occasionally, the bolts can become loose after thousands of miles. You might discover the leak can be resolved simply by tightening the cover.

Assuming the leak is still a problem after tightening the bolts, remove the valve cover. Every vehicle is a little different; the cover in your car may be surrounded by PCV hoses and cables, which you’ll likely need to disconnect.

Next, loosen and remove the bolts holding the cover in place on the cylinder head. Take the cover off while being careful not to let anything fall into the engine.

Your cover may be fitted with a groove that holds the valve cover gasket in place. Remove the VCG and look for residue along the perimeter of the cover. If any exists, scrape it off. Otherwise, it may play havoc with the seal of the new VCG.

The last step is to install the replacement valve cover gasket and bolt the valve cover back onto your car’s engine. Tighten the bolts, reconnect any of the hoses and cables that you had previously detached, and start your engine. The VCG should maintain a tight seal.

Replenish The Oil Until The Leak Is Repaired

If you’re unable to replace the valve cover gasket immediately, make sure that you keep the oil level in your car replenished. Too often, drivers neglect to keep the level up when their engine is leaking oil. If your engine lacks sufficient oil during operation, it can overheat due to excess friction. That will often cause expensive damage (a shame given that the gasket costs less than $20).

An experienced mechanic will probably be able to replace a VCG in less than an hour. If you intend to do the job yourself, set aside a few hours to make certain the gasket is installed properly.

Vehicle Classics

Related posts

What Is A Technical Service Bulletin?

By admin Posted in Car Basics / No Comments »

What Is A Technical Service Bulletin?

When you drive a new vehicle off the dealership lot, you expect that your first few years of ownership will be problem-free. In most cases, they are. The parts and systems under the hood are brand new. Sadly, auto manufacturers occasionally make mistakes. When they do, they’ll often issue a technical service bulletin.

Most won’t affect you. In fact, were you to read the majority of the TSBs that are issued by automakers, you might be inclined to ignore them. For example, a manufacturer may send out a notice about a faulty cigarette lighter. It may be irrelevant to you unless you’re a smoker.

Having said that, it is important to understand what a technical service bulletin is and how it affects you as an owner. In this article, I’ll describe how they differ from recalls. I’ll also explain how to make sure the appropriate repairs are performed in the event a TSB is issued.

How Is It Different Than A Recall?

Many owners believe recalls and TSBs are the same. The former is issued when an automaker discovers that the design of their vehicle includes a safety risk or a problem with emissions. The recall does not expire. It remains “live” or “open” until the owner has a dealership technician fix the problem.

A technical service bulletin is sent to the dealership by the automaker for design problems that do not present safety risks. Unlike recalls, they usually expire once the standard warranty period ends. If the owner fails to have the work performed and the warranty expires, his chance to have the problem resolved by the dealer for free also expires.

Having The Necessary Repairs Performed

Occasionally, TSBs address serious problems with key parts and systems. For example, your car’s engine may have a recurring hard starting issue that is due to a design flaw. Or, the transmission may slip. If you suspect a problem you’re experiencing with your vehicle is due to design issues, you can investigate existing technical service bulletins online. Be aware that the content will often exclude details that are available to the dealership.

The key to having TSB repairs done by the dealer is to make sure one of the auto technicians can duplicate the problem. For example, suppose you’re having trouble cranking your engine in the morning. Further suppose you have noticed a technical service bulletin that mentions a cold start engine issue. If you deliver your vehicle to the dealership after warming the engine, they won’t be able to duplicate the cold start. Deliver it the previous evening. Call in the morning and ask them to crank the motor. Once they verify the cold start, they can resolve it based on the TSB.

Again, most technical service bulletins are not important. Nor are they widespread. However, if you experience a glitch with your car, and it’s still under warranty, check online for a TSB. It may be the quickest path toward having the problem resolved.

Vehicle Classics

Related posts